P&R Photos - CRI
Home Help Search Login Register
Welcome,Guest. Please login or register.

If you're trying to register on the board or you have a friend that is trying to register and they just can't seem to be able to get approved, please contact us. Send an email to andrew@p-rphotos.com,
or call the office at 803-329-7557 (ask for Andrew). I'm in the office Mon–Thurs 8am – 5pm. In most cases, it will only take two minutes to get your account approved.
If you send an email, please include your username and password. We apologize for the inconvenience.

January 16, 2018, 02:24:36 AM
News:

Pages: [1]
Author Topic: 2017 HR Predator Adult Class Rules  (Read 769 times)
Group: Moderator
Jr. Member
*****

Posts: 96
These rules are the rules that Hanging Rock Speedway used with their stock Predator ( out of the Box ) class. The only changes to the rules are so they are easier to read and adaptable to Patriot Speedway
Our intentions are to continue the class at Patriot Speedway in it's original form. We will run this class with EL tires only.
Age 15 years and up : 375 lbs class....
Open Clutch and axle gear rule ....(no skip tooth allowed)
RPM rule on the governor.
To get to the rpm you want, adjust the throttle stop screw to come in before the required rpm rule. You may remove the spring on that screw and replace it with a nut so that you can keep it locked into the desired rpm.
RPM will be checked with a tach of tracks choosing
5500 RPM max.
An engine that is over the rpm mark will be disqualified. Arguing with us over what’s legal and what’s not will not be tolerated. The governors must kick in when checked.
No claim in this class, Protest only. Must finish in the money or capable of moving into the money in order to protest. Must finish behind the person you are wanting to protest. No protesting behind you. (See protest rules under the note section)
 
 
RULES:
1) The engine must be OEM out of the box…hemi heads are allowed in this class
2) The governor must be connected and operational
3) The air filter must be a stock unit. The air filter and sock must be installed per factory.
All holes to the air box must be plugged.
4) The engine must have a key as installed by factory in the flywheel
5) The engine must pass a governor test on the stand if asked 5500 max
6) Protest Fee $100 w/ 30 to accept.
7) You may disconnect vent tube on tank
8) You must run the factory gas tank.
9) Gas cap may be drilled to prevent vapor lock. Multiple holes allowed.
10) Stock OEM Exhaust system as from factory.
       Hemi head must run hemi muffler. Straight plug head must run OEM muffler. No hemi
       Mufflers allowed with a non hemi head. No swapping of parts allowed.
11) You may disconnect throttle stop screw
12) You can only bolt on a chain guard, no other aftermarket parts allowed
13) You can disconnect wire used for oil sensor and tape it.


---------------------------
Boyd Maloney
   
Pages: [1]
« previous next »


 

Theme © PopularFX | Based on PFX Ideas! | Scripts from iScript4u January 16, 2018, 02:24:36 AM